Showing posts with label ae86 20v. Show all posts
Showing posts with label ae86 20v. Show all posts

Tuesday, January 8, 2013

AE86 4AG 20Valve with Apexi Power Fc tune

 A customer from Melaka with an AE86 come for a tune.He is using Apexi Power FC which s from AE86 16v but it works on the 4AG20v except that it does not activates VVT.

 The Power FC with Commander

Results achieved on a stock 20v engine.Notice the loss of midrange power due to the VVT not activated (red graph after Power FC,Blue graph stock ecu)

Thank you for your support.

Tuesday, September 4, 2012

AE86 + 4AG 20v + Adaptronic e420d Re-tune

 This car have been featured before,the owner did a few extra mod and asking for a re-tune.So to the dyno we went.
 

 
I can't believe it! 151.2 WHP this time,153 Nm of torque. The engine is still untouched! The extra mod is a full set of titanium cat back exhaust system and an adjustable cam pulley on exhaust cam. This must be a one healthy engine.

Come back home smiling.

Wednesday, May 23, 2012

Toyota AE86 4AG 20v + Adaptronic e420d ecu

A customer would like to replace the old 4AG 16v engine in his AE86 with a newer 4AG 20v,but as the 20v is from a front wheel drive Levin/Trueno,when it being fitted to rear wheel drive format,the distributor will hit the firewall,there are 3 solutions to this,which is knocking the firewall for the distributor to clear,make a distributor relocation kit or use a Standalone engine management system to convert the ignition system form distributor to wasted spark or direct fire (individual coils).

A better alternative is the third option which is using a standalone engine management system.R.N.R Autosport have suggested the owner to go for direct fire coil on plug ignition system.In this case the coil used is from Nissan SR20 S15 Silvia.ECU of choice is the Adaptronic e420d.This little ecu is packed of features for its relatively cheap price.
Coil harness fabrication
Here is the finished custom made harness,all wires are soldered and shrinked wrap the entire loom.

From another angle

 Fitted on the engine,the wiring literally hidden.

Another view


Another angle from top

Put the car up on the Dyno Dynamics Chassis Dynamometer
 
The result of the conversion.The engine is totally stock standard except for extractor,coil on plug converision and the custom made trumpets.A good result considering its a RWD car which has a higher transmission losses,not to mention this is tuned on RON 95 petrol.The fuel consumption is greatly decreased,more than 14km/L on highways (as reported by the owner). Ecu running flawlessly everytime,no matter cold or hot start.

Congrats to the owner,a rare classics,AE86 is a gem.This project is will not end here,the owner has a few more plans for his baby.So watch out this blog guys.Thanks.