Showing posts with label turbo. Show all posts
Showing posts with label turbo. Show all posts

Friday, April 5, 2013

Honda Civic EG + B16A Turbo kit + E-manage

A revisit to the VTEC turbo B16A from previous post.The engine have been completed and the owner have finished running in his engine,now its tuning time.

This engine runs on stock ecu and E-manage blue with Greddy Pressure sensor.Mechanicals by Garage Daz and tuning by R.N.R Autosport.


 Top fuel turbo kit.

 
Final figure,boost is 0.45bar.This turbo kit have very good response,due to small sized turbo.Fuel is RON97

Thursday, December 8, 2011

Honda B16A VTEC Turbo Build - Part 1

Garage Daz and R.N.R Autosport are working hand in hand doing this build.All the mechanical preparation is done by Garage Daz,while R.N.R Autosport is in charge of the wiring and tuning.

Some teaser ;
Stock B16A piston and rod on the left, Low Comp piston on the right

Low comp piston and H-Beam connecting rod

Block guard installed

Head being prepared

Block being prepared

Complete assembled

Spoon cam cover


Stay tuned!

Monday, June 27, 2011

Mitsubishi Airtrek Turbo ECU Re-Flash



My good friend ask me if i could help him up to flash his Mitsubishi Airtrek Turbo as he said the car is going too rich on acceleration, he can see black smokes on his rear view mirror.
A date was set and he pick me up at home,we go for a logging using EvoScan and LM2 wideband O2.


After some logging and discussing with him what to do,the owner decide to try out a ROM by Tomei. I then flashed the ROM into the ecu.

Here is the Tactrix cable and DIY Mitsubishi Reflash Connector,as the Airtrek is having a different type of connector for re-flash compared to EVOs.

The slightly modded engine,with Tiptronic INVECS2 gearbox,same as Evo 7 GTA.

A quick test drive and he did feel the car abit lively compared to previous map. I did a log again on the AFR and make sure everything was on the safe side,and listen for knock as we drive along. The owner is using RON95. After satisfy with the datalog,its time to go home...the car will go on the dyno after this for a further fine tuning and to see how many horses she can put out..

Thursday, June 16, 2011


Here is another project by friend and partner Garage Daz,a Mitsubishi GSR Turbo inside a Proton GEN2. Small mods include tubular exhaust manifold and external wastegate.The orginal GSR dashboard is also installed.


Mitsubishi GSR 1.8 Turbo (CK Lancer)




Lancer GSR dashboard.